What keyboard / mouse mapping do you use?
6 years ago
Greenland

We are at a point in speedrunning mainly San Andreas and GTA III where sometimes you have to hold down so many keys at a time, that - if you don't have an N-key rollover keyboard (all keys can be registered at the same time) - you might encounter issues, potentially losing time in your runs or even dying / failing missions. Sometimes up to 5-6 keys have to be pressed at the same time. Not for a long period, but even if just one of these keypresses fail to register, sometimes chaos is inevitable.

It is also possible, that you didn't find the default control scheme satisfactory and changed it around a bit to suit your needs better.

I'd like to ask what kind of key and mouse button mappings have you set up for either SA or III? Also if you are using a tenkeyless keyboard, what have you remapped special controls to (hydraulics, forklift, hydra)? I feel like this mainly involves these 2 games because of holding phonecalls / submission key, so didn't want to post in GTA general forums.

My settings: I personally found holding Tab while driving to be uncomfortable, so I switched to the key I use in III, Caps Lock as my action / alt fire key. On one of my older keyboards I couldn't hold caps lock + W + E at the same time to drive-by, so I tried remapping looking right to R, but it feelt a bit awkward. I also use MMB to raise height in plane / do a wheelie and RMB to lower / lean forward. I also use left shift for sprinting and space for jumping. In GTA III my camera change key is Num 3, which is right next to look left / right / back with Num1 and 2 and ensures my hand is close to the mouse. On 60-80% sized keyboards I'd use the keys to the left of enter in an upside down T shape for special controls. For GTA III I move the idea on the Numpad (1-3) over to left and right square bracket and backslash (right over Enter on the ANSI layout).

Edited by the author 6 years ago
ult1matum likes this
South Holland, Netherlands

My setup changed quite a bit over time: I also found tab uncomfortable, so I switched to left shift to hold calls, but I used that to jump... so I mapped jump to caps lock. Not the best, but it worked. Got a bit tired of caps lock being randomly on/off after runs + pressing it while having a call held with shift wasn't convenient, so I eventually mapped it to one of my mouse buttons instead.

I also used to use the side mouse buttons for leaning while driving bikes, but RMB was more convenient to press rapidly than the side buttons so now I lean back with the side button, but forward with RMB.

I have honking on MMB, very easy to get to for dealing with cops.

And probably the most minor one... Because of the keyboard ghosting issues, I can't hold WAS at the same time, so I mapped a secondary brake/reverse to X so I can do the 360 in driving school.

ult1matum likes this
Hampshire, England

I have a Logitech g600 mouse which has a numpad on the side which I can bind anything to, so I'm not sure how useful my settings are (who wants to use "4" for holding a call?)

I've learned to manage with holding Tab, however I've mapped lean forward to Lshift, Hydra and Forklift are Numpad + and Numpad Enter. Hydraulics are Num8, Num2, Num4 and Num6. My keyboard doesn't support N-key rollover and my mouse is default settings

LMB - lean forward RMB - lean backwards MXB1 (mouse side button ) - phone calls Left shift - honking Default hydra/hydraulics controls (numpad)

Pretty comfortable

Śląskie, Poland

rmb lean forward down - lean backward lctrl - call h - honking comfortable as fuck

Lithuania

Everything by default, except that I use alt to jump (No, I don't dupe, so I don't have to worry about alt+tab)

Poland

LCTRL - jump TAB - taking calls XMB1 - looking behind XMB2 - holding calls

1/LMB - lean forward 2/XMB1 - lean backwards RMB - honking ` - sub-mission

Russia

capslock=xmb1 because dinput

https://i.imgur.com/9m11D3h.png

https://i.imgur.com/brDy0nU.png

Edited by the author 6 years ago
Australia

I bind phone call to side mouse button (mouse4). I find it easier to hold down than keys. The other side mouse button for honking (mouse5) :) Everything else is default other than lean forward and back on a bike with mouse1 and mouse2. Flying with arrow keys

Edited by the author 6 years ago
California, USA

I only run GTA 3, so I can't help with speedrunning SA, but I use: WASD for driving/moving Enter for camera change LShift to sprint (and honk) Space to jump(and handbrake) Caps Lock to look back (on foot) and sub-mission Q+E for looking left and right MMB to look backward RMB to aim and LMB to shoot Scroll wheel to change weapons on foot (and scroll up to change radio in a car)

Edited by the author 5 years ago
Hungary

SAN ANDREAS Most of the things are set on default for me. These are the only things I've changed:

Action - Middle Mouse / Extra Mouse Button (depends on whether I use DINPUT or not, extra buttons only work without it) RMB - Leaning forward (I prefer this one because I can still despawn vehicles while driving a bike)

Other than these I use Alt for leaning forward as well and Left Shift for leaning backwards. I use this when I'm flying and holding a phone call at the same time. This isn't needed if you use something like Capslock/Shift/Ctrl as an action key.

Being on a bike is another great use of setting leaning backwards like this.

III Default stuff again except:

Left Alt - Despawning traffic (aka changing the camera) (I don't like to take my hand off the mouse unless I'm flying the dodo) Extra Mouse Button - Submission (It's easier to hold taxi and other submissions, especially through the mission SCaM)

Arrow up - Dodo down Arrow down - Dodo up

I simply set this to make dodo flying at least a little similar to San Andreas (Default is Num 9 and Num 6)

Edited by the author 6 years ago
Friesland, Netherlands

WASD for moving Shift for sprint, Space for jump (like literally every other game does it) Shift for horn, Space for handbrake 2 for submission Q, E & MMB for looking in directions F for enter exit Tab for phonecall action

B for leaning forward, N for leaning back on bike (and the equivalents for planes/helis/flying cars) X and C for forklift/dozer/dumper controls etc (also hydra thrusters, but I use default Num 8 and Num 2 for hydra as I need my left Thumb on B + N Numpad 4 Special Control Right Numpad 6 Special Control Left (No, I didn't mix these up)

Fire: LMB Alt Fire: RMB I have these bound to keyboards keys as well, but dont recall using them in recent years.

Change camera: V Change radio: R / mousewheel Change UTP Song: F5

Y and N for talking and trip skipping etc

G and H for gang controls (holding H disbands the group)

Mwheel for Camera and sniper zoom

Lalt for walk, C for crouch

RMB for aim

Turkey

How can i use the XMB buttons. I can't do this in GTA Settings.

SpeedyFolf likes this
Netherlands

You might be using the mouse fix dll. The best thing to do is binding them to keyboard keys, either via mouse software or via autohotkey

Turkey

I downloaded a mousefix dll named "DINPUT8.dll" but it doesn't work. I'm using XMouse Controller but I want to do it in game settings. What can i do?

Lebanon

use compatipility mode: windows 98/windows me it worked for me but your save directory will relocate to users/public/documents/gtasanandreas

Edited by the author 3 years ago
Turkey

It doesn't work.

Lebanon

if you have a gamepad/controller plug it in then open the game while in game unplug the controller then your mouse might work. gta sa is a glitchy game especially on new hardware

Game stats
Followers
3,250
Runs
3,019
Players
487
Latest news
Changes to the GTA:SA leaderboard

The GTA:SA community has been deteriorating over a long period of time. Many top runners are not currently present on the leaderboard. This issue has not been seriously addressed yet, but an attempt will be made to remedy it now.

As of this news post, the San Andreas leaderboard will function in

1 year ago
Latest threads
Posted 1 year ago
0 replies
Posted 1 year ago
Posted 4 years ago
0 replies
Posted 5 years ago
0 replies