Yes.

Of course, you can run those without glitches.

As of this post PS2 emulator is allowed on the leaderboards for this game. Runs must be played on PCSX2 (Nightly) v1.7. or above (available here). Runs that were performed prior to this announcement that still adhere to these rules will also be permitted on the boards. Keep in mind that some of the required settings are exclusive for this game but not other Crash games. If any problems arise, get in touch via the OG Crash Speedrunning Discord server.

Required Settings:

Settings -> Bios

• Please match Bios to Region of the title

• Disable: Fast Boot

Settings -> Emulation

• Disable: Enable Multithreaded VU1 (MTVU)

• Disable: Enable Instant VU1

Settings -> Interface (to open it)

• Advanced -> Enable: Pause on TLB Miss (located at the top under EmotionEngine)

Tools -> Show Advanced Settings: Enabled

Quality of Life Settings:

Settings -> Interface

• Disable: Pause On Focus Loss

• Enable: Render to Separate Window

• Enable: Disable Window Resizing

• Disable: Pause on Menu [Within the NoGUI Menu]

Settings -> Graphics

• Use whatever renderer you prefer (Recommended: Vulkan then OpenGL)

• Enable: No-Interlacing Patches [NTSC-U only]

• Enable: Disable Interlace Offset

• Enable: Anti-Blur

If you're running a PAL/NTSC-J title set Deinterlacing to what you prefer, recommended is Blend (Top Field First).

There are definitely a few strats that would be worth making a TAS for but at the moment Dolphin TASing is not super duper convenient. Maybe somebody else is interested in making a TAS anyway though, who knows?

As of this post PS2 emulator is allowed on the leaderboards for this game. Runs must be played on PCSX2 (Nightly) v1.7. or above (available here). Runs that were performed prior to this announcement that still adhere to these rules will also be permitted on the boards.

Required Settings:

Settings -> Bios

• Please match Bios to Region of the title
• Disable: Fast Boot

Settings -> Emulation

• Disable: Enable Multithreaded VU1 (MTVU)
• Disable: Enable Instant VU1

Quality of Life Settings:

Settings -> Graphics

• Use whatever renderer you prefer (Recommended: Vulkan then OpenGL)
• Enable: No-Interlacing Patches [NTSC-U only]
• Enable: Disable Interlace Offset
• Enable: Anti-Blur

If you're running a PAL/NTSC-J title set Deinterlacing to what you prefer, recommended is Blend (Top Field First).

Sure you can!

I think you can emulate the GBA slot on a modded 3DS somehow (not sure how exactly though) so all you'd need to do is load Titans GBA into that. You should then get the bonus if all works well. Looks like Castlevania: Dawn of Sorrow has a similar thing where you're allowed to use bonuses gained via GBA connectivity so maybe you could ask that community about how to emulate the slot if you can't find a way elsewhere.

Since we try to have loadless timing on the leaderboards to allow cross-platform comparisons, we have employed several measures (all of which are noted in the rules section!).

What counts as a load? Obviously, all blatant loading screens with an artwork and the text "LOADING" flashing above or underneath it are counted as loading times. Additionally all the lag/freeze frames preceding a loading screen or an FMV cutscene also count towards loading as those can vary very significantly depending on the platform.

How do I remove loads from my run? If you play on the Dolphin emulator, you are in luck. Just use the load remover found under 'Resources' and follow the instructions. It should do all the work for you. If you play on console, check the rules. I have added tables with fixed loading time values for most versions (obviously this is WIP as there isn't footage for every platform/region). The values are all based on runs using original game discs, therefore unintended methods of running the game via some sort of hombrew (e.g. OPL, Nintendont) are categorically banned unless the runner provides proof of their loadless time (for example by attaching a video with the loads cut out).

What problems are there with this? Xbox loads vary a fair bit depending on your console revision. There are different console runs with different disc drives (and harddrives) which significantly affect how quickly a game can load. The tables include the fastest Xbox loads known and Xbox runners are free to use that value as an overgeneralisation. If they want to know their accurate loads, there is no way but to time them manually. Additionally, the level loading screens on Xbox speed up slightly if the level has been loaded prior in the same session. To get the fastest and most consistent loading result on Xbox, enter every level once before starting runs/attempts. Another "problem" is that the load remover for Dolphin doesn't always track loading 100% as it visually appears, so it unpauses a bit sooner/later than you would expect. Realistically, Dolphin times would end up only a few seconds slower than they technically should be, but I guess that's made up by the game lagging less on emulator so it should be a non-issue.

What upsides does this have? Less clutter on the leaderboards, more competition, less reliance on having to obtain the fastest console/version.

KEmulator is definitely alright (I used a version of that for my run iirc).

Yet another update on the PS1 emulation rulesets has taken effect, as stated here: https://www.speedrun.com/crash/thread/nwj89

Also, Dolphin is allowed for Gamecube/Wii emulation on a per-game basis. Please check each individual leaderboard on whether you can use it or not.

--- NOTE: Crash Team Racing has a differing ruleset for emulators which can be found here. ---

When streaming/recording a run you must be able to capture the window to show what emulator is being used.

BizHawk is able to display the status bar below the game window. That must be displayed.

DuckStation will has specific requirements below. You are able to run without showing the window.

You must also state what emulator is being used when submitting your run.

Accepted Emulators:

• XEBRA
• BizHawk 2.9 or newer (Nymashock and Octoshock are allowed).
• mednafen
• DuckStation 0.1-6280-gcf760bbe or newer [Recommended]

Accepted Emulator on Mac:

• OpenEmu

BizHawk Setup:

Games can only run under the cue format.

• Config > Speed/Skip > Audio Throttle

If you're using the Octoshock core

• PSX > Options
• Select either mednafen mode option
• Deinterlacing the image is allowed. Select Bob in the same window. To verify that you are running with Audio Throttle enabled you must hit the increase/decrease speed keys [plus/minus] it will display a message on screen.

DuckStation Dedicated Rules:

These settings can be displayed by enabling quick menu (Default: Escape Key). You must show settings of the core settings before/after the run, you must match these settings.

Settings -> Bios

• Disabled: Fast Boot

Settings -> Console

• Disabled: 8MB RAM
• Execution Mode: Interpreter (Slowest)
• Clock Speed Control & Recompiler ICache: Disabled
• Async Readahead: 8 sectors (53KB/16ms)
• Read/Seek Speedup: None
• Disabled: Preload Image to RAM
• Disabled: Apply Image Patches

Settings -> Emulation

• Emulation Speed: 100%
• All Other Settings Disabled

Display -> Enhancements

• Disabled: Widescreen Hack
• Disabled: Force NTSC Timings (60hz-on-PAL)
• Disabled: Geometry Correction

Custom settings are allowed for anything that isn't mentioned such as internal resolution scale. We would allow enabling "Show Enhancement Settings" to simplify the user end side. However, some of the settings do not appear if they're enabled.

Quality of Life Settings: Settings -> General

• Enable: Render to Separate Window
• Enable: Disable Window Resizing

Settings -> Display

• Use whatever renderer you prefer (Recommended: Vulkan then OpenGL)
• Aspect Ratio: Auto or 4:3

If there are any uncertainties or problems, make sure to join the Discord server and contact a mod.

ok cool

Emulation via Dolphin and PPSSPP is now allowed, but hidden from the board by default. You are free to submit runs however.

It would be allowed but the game may be a bit more prone to freezing or have other issues. Give it a shot, I'd say.

If you do a run, I will consider it.

As of a few weeks ago, Time Trials for individual levels are also hosted on this site here for both the GBA and the N-Gage versions.

Over the past few months Raikzer has worked on a load remover component for LiveSplit that is able to detect loading screens in TWoC in real-time. You can download it from the Resources tab. At the moment, this is still a public beta so further updates are bound to come in the future. Please follow the instructions on the GitHub page of the project for a setup. If you're struggling to set it up with the instructions, feel free to ask for help in the Discord server.

The load remover is currently compatible with the following versions of the game:

• PS2 [EN]
• PS2 [JP] (further tests are being made here though)
• Xbox [EN]

More console (Gamecube) and language (PAL languages, Korean) support will come in the future. I will update this post whenever more features and version support is added.

What exactly does it detect? It detects the beginning and end of loading screens between levels and the warp room. It also pauses on every fully black frame. These show up before and after loading screens to transition into the level/warp room, but also before mask dialogue cutscenes are being loaded and during death transitions. All of these instances (even the length of the black screen after dying) vary from console to console - including different models of the same console - and sometimes from region to region. Removing this difference is the point of the load remover.

Finally, this will cause a few changes in the rules. From now on, players with compatible versions of the game are advised to use the load remover to submit their times. Using the old spreadsheet method (which, frankly, nobody liked) will soon be allowed no more unless you use a version that is not compatible with the load remover yet. Once we can safely consider the load remover out of the beta stage, it will be mandatory. Cutting out your loads in video editing could still be allowed under certain circumstances (such as when you're doing potato cam stuff) but that usually means more work for ya.

If you use the load remover and notice any hiccups (e.g. pauses during gameplay or undetected loading screens) please report them to either Raikzer or myself.

And last but not least: Do not cover your game feed in OBS with anything (that includes alerts) or it may wrongfully detect or ignore something that it shouldn't!

Hi, can this game be set as Mobile? Thanks! https://www.speedrun.com/cotr

Just compare it to the 1st warp room in any given run that you deem good. There won't be single warp room leaderboards.

You are thinking of CBNK2 (https://www.speedrun.com/cbnk2) and not CNK2 (I know, the titles are super similar, it's dumb). Unfortunately though, in order to play CBNK2 these days you'll require a jailbroken iOS device (e.g. an old iPhone, preferably running iOS 6 or lower to avoid compatibility issues with the game) and then install the game through the means of an .ipa file. I'm not sure how to feel about linking that file on this site though so if you're still interested, drop me a message on Discord and I'll help you out. I've recently gone through the whole process with an iPhone 3GS so it's certainly possible to get access to the game. Alternatively you can just be lucky and have an old device that still has the game downloaded but that's not too likely.