From 17/11/2021 10:00 GMT Video proof that shows the entire races is required.

Hello to all,

I think that it would be better if we add in-game time to tournaments leaderboards, to avoid issues with different loading times that depend by game platform (ps1, ps2 and emulators have different loading times).

Do you agree?

If yes, I will fix all leaderboard runs to match this new rule.

Hello to all, there's an huge difference between loading times of ePSXe and RetroArch: on RetroArch loading times are slower than ePSXe (from 1 to 2 seconds per load). So is it possible to split old runs from the new ones made on RetroArch? maybe you can create an "obsolete" category where you can put all old runs made on ePSXe.

Another thing, is it possible to put runs made on PS2 (fast load feature) in a different category, or at least to separate emu runs from real console runs.

Thank you!

Hello, can you add some categories about missions?

• Mission 1-100 (veeeery long)
• Mission 1-50
• Mission 51-100 And others for who doesn't have so much time:
• Mission 1-25, 26-50, 51-75, 76-100
• Mission 1-10, ...., 91-100 And single missions categories in "single level" categories.

All of these categories with and without z objects in different leaderboards

Thank you!

I have two things to propose

Is it possible to add the time of the three laps to the time of each circuit in addition to the time of the single lap?

Is it possible to create a category in which there are single races in race mode?

Hello, why my run has been rejected?

First frame: https://imgur.com/a/0rvfpRV

Last frame: https://imgur.com/a/5UtyE9l

Hi to all, is it possible to add a category where the runner has to complete all championships and all acme challenge? the name of category would be: 100%

Why only in Any% Warpless we can select the character type used in the run?

These rules will be in effect on October 21, 2020 at 12 AM GMT

When streaming/recording a run you must be able to capture the window to show what emulator is being used.

RetroArch will has specific requirements below. You are able to run without showing the window.

Accepted Emulators: • XEBRA • mednafen • RetroArch (Beetle/Beetle HW) • BizHawk

BIZHAWK SETUP AND RULES BizHawk is able to display the status bar below the game window that must be displayed. You have also to show that all Hotkeys are cleared: Config->Hotkeys->Misc->Clear All Games can only run under the cue format. • PSX > Options • Select either mednafen mode option. • Deinterlace the image is allowed. Select Bob in the same window. • Config > Speed/Skip > Audio Throttle [Important for 2.5 Users] To verify that you are running with Audio Throttle enabled you must hit the increase/decrease speed keys [plus/minus] it will display a message on screen.

RETROARCH RULES You must show settings of the core settings before/after the run. Your settings must match this: • CPU Dynarec: Disabled (Beetle Interpreter) [Default] • Cycles: 128 (Default) • GTE Overclock: Disabled • GPU Overclock: 1x (native) • Skip Bios: Disabled. • Access Method: Synchronous • Loading Speed: 2x (native) • PAL (European) Video Timing Override: OFF Recommended: Keep PGXP Disabled Custom settings are allowed for anything that isn't mentioned such as resolution.

For the quick answer on "why did we drop ePSXe?" That emulator for PC has not been updated in 4 years and despite being the "most accurate emulator"^ it relies on plugins compared to the other four options.

^Due to being closed source, it was able to get away with faking the scores on the PS1 Test Suite. Games that are tested to what ePSXe states it "passed" has outright failed.

(Almost all the rules taken from Tekken series, by Spikestuff)

These rules will be in effect on October 21, 2020 at 12 AM GMT

When streaming/recording a run you must be able to capture the window to show what emulator is being used.

RetroArch will has specific requirements below. You are able to run without showing the window.

Accepted Emulators: • XEBRA • mednafen • RetroArch (Beetle/Beetle HW) • BizHawk

BIZHAWK SETUP AND RULES BizHawk is able to display the status bar below the game window that must be displayed. You have also to show that all Hotkeys are cleared: Config->Hotkeys->Misc->Clear All Games can only run under the cue format. • PSX > Options • Select either mednafen mode option. • Deinterlace the image is allowed. Select Bob in the same window. • Config > Speed/Skip > Audio Throttle [Important for 2.5 Users] To verify that you are running with Audio Throttle enabled you must hit the increase/decrease speed keys [plus/minus] it will display a message on screen.

RETROARCH RULES You must show settings of the core settings before/after the run. Your settings must match this: • CPU Dynarec: Disabled (Beetle Interpreter) [Default] • Cycles: 128 (Default) • GTE Overclock: Disabled • GPU Overclock: 1x (native) • Skip Bios: Disabled. • Access Method: Synchronous • Loading Speed: 2x (native) • PAL (European) Video Timing Override: OFF Recommended: Keep PGXP Disabled Custom settings are allowed for anything that isn't mentioned such as resolution.

For the quick answer on "why did we drop ePSXe?" That emulator for PC has not been updated in 4 years and despite being the "most accurate emulator"^ it relies on plugins compared to the other four options.

^Due to being closed source, it was able to get away with faking the scores on the PS1 Test Suite. Games that are tested to what ePSXe states it "passed" has outright failed.

(Almost all the rules taken from Tekken series, by Spikestuff)

These rules will be in effect on October 21, 2020 at 12 AM GMT

When streaming/recording a run you must be able to capture the window to show what emulator is being used.

RetroArch will has specific requirements below. You are able to run without showing the window.

Accepted Emulators: • XEBRA • mednafen • RetroArch (Beetle/Beetle HW) • BizHawk

BIZHAWK SETUP AND RULES BizHawk is able to display the status bar below the game window that must be displayed. You have also to show that all Hotkeys are cleared: Config->Hotkeys->Misc->Clear All Games can only run under the cue format. • PSX > Options • Select either mednafen mode option. • Deinterlace the image is allowed. Select Bob in the same window. • Config > Speed/Skip > Audio Throttle [Important for 2.5 Users] To verify that you are running with Audio Throttle enabled you must hit the increase/decrease speed keys [plus/minus] it will display a message on screen.

RETROARCH RULES You must show settings of the core settings before/after the run. Your settings must match this: • CPU Dynarec: Disabled (Beetle Interpreter) [Default] • Cycles: 128 (Default) • GTE Overclock: Disabled • GPU Overclock: 1x (native) • Skip Bios: Disabled. • Access Method: Synchronous • Loading Speed: 2x (native) • PAL (European) Video Timing Override: OFF Recommended: Keep PGXP Disabled Custom settings are allowed for anything that isn't mentioned such as resolution.

For the quick answer on "why did we drop ePSXe?" That emulator for PC has not been updated in 4 years and despite being the "most accurate emulator"^ it relies on plugins compared to the other four options.

^Due to being closed source, it was able to get away with faking the scores on the PS1 Test Suite. Games that are tested to what ePSXe states it "passed" has outright failed.

(Almost all the rules taken from Tekken series, by Spikestuff)

These rules will be in effect on October 21, 2020 at 12 AM GMT

When streaming/recording a run you must be able to capture the window to show what emulator is being used.

RetroArch will has specific requirements below. You are able to run without showing the window.

Accepted Emulators: • XEBRA • mednafen • RetroArch (Beetle/Beetle HW) • BizHawk

BIZHAWK SETUP AND RULES BizHawk is able to display the status bar below the game window that must be displayed. You have also to show that all Hotkeys are cleared: Config->Hotkeys->Misc->Clear All Games can only run under the cue format. • PSX > Options • Select either mednafen mode option. • Deinterlace the image is allowed. Select Bob in the same window. • Config > Speed/Skip > Audio Throttle [Important for 2.5 Users] To verify that you are running with Audio Throttle enabled you must hit the increase/decrease speed keys [plus/minus] it will display a message on screen.

RETROARCH RULES You must show settings of the core settings before/after the run. Your settings must match this: • CPU Dynarec: Disabled (Beetle Interpreter) [Default] • Cycles: 128 (Default) • GTE Overclock: Disabled • GPU Overclock: 1x (native) • Skip Bios: Disabled. • Access Method: Synchronous • Loading Speed: 2x (native) • PAL (European) Video Timing Override: OFF Recommended: Keep PGXP Disabled Custom settings are allowed for anything that isn't mentioned such as resolution.

For the quick answer on "why did we drop ePSXe?" That emulator for PC has not been updated in 4 years and despite being the "most accurate emulator"^ it relies on plugins compared to the other four options.

^Due to being closed source, it was able to get away with faking the scores on the PS1 Test Suite. Games that are tested to what ePSXe states it "passed" has outright failed.

(Almost all the rules taken from Tekken series, by Spikestuff)

These rules will be in effect on October 21, 2020 at 12 AM GMT

When streaming/recording a run you must be able to capture the window to show what emulator is being used.

RetroArch will has specific requirements below. You are able to run without showing the window.

Accepted Emulators: • XEBRA • mednafen • RetroArch (Beetle/Beetle HW) • BizHawk

BIZHAWK SETUP AND RULES BizHawk is able to display the status bar below the game window that must be displayed. You have also to show that all Hotkeys are cleared: Config->Hotkeys->Misc->Clear All Games can only run under the cue format. • PSX > Options • Select either mednafen mode option. • Deinterlace the image is allowed. Select Bob in the same window. • Config > Speed/Skip > Audio Throttle [Important for 2.5 Users] To verify that you are running with Audio Throttle enabled you must hit the increase/decrease speed keys [plus/minus] it will display a message on screen.

RETROARCH RULES You must show settings of the core settings before/after the run. Your settings must match this: • CPU Dynarec: Disabled (Beetle Interpreter) [Default] • Cycles: 128 (Default) • GTE Overclock: Disabled • GPU Overclock: 1x (native) • Skip Bios: Disabled. • Access Method: Synchronous • Loading Speed: 2x (native) • PAL (European) Video Timing Override: OFF Recommended: Keep PGXP Disabled Custom settings are allowed for anything that isn't mentioned such as resolution.

For the quick answer on "why did we drop ePSXe?" That emulator for PC has not been updated in 4 years and despite being the "most accurate emulator"^ it relies on plugins compared to the other four options.

^Due to being closed source, it was able to get away with faking the scores on the PS1 Test Suite. Games that are tested to what ePSXe states it "passed" has outright failed.

(Almost all the rules taken from Tekken series, by Spikestuff)

Hi, we've ad idea for other 4 categories:

• Oxide 100%: you have to collect all trophies, gems and crystals of warp room 1, 2, 3, 4 before to beat Oxide.

• Oxide Max%: you have to collect all trophies, gems, crystals and gold relics of warp room 1, 2, 3, 4 before to beat Oxide.

• Papu Papu Any%: You have to beat Papu Papu.

• Papu Papu 100%: you have to collect all trophies, gems and crystals of warp room 1 before to beat Papu Papu.

what do you think?

EDIT: there are also other categories:

• Bearminator Any%: You have to beat Bearminator.

• Bearminator 100%: you have to collect all trophies, gems and crystals of warp room 1 and 2 before to beat Bearminator.

• Komodo Brothers Any%: You have to beat Komodo Brothers.

• Komodo Brothers 100%: you have to collect all trophies, gems and crystals of warp room 1, 2 and 3 before to beat Komodo Brothers.

Hi to all, I have an idea about a new possible category: Max%, where you have to collect all letters, all objects (fruits, lifes) and all pacdots, open all doors, do all mazes then complete successfully all bonus levels and to reach 100% completition (in USA and PAL version also Marathon of mazes), excepted in boss levels. What do you think about it? I've done also a sample run.

Hi, Is it possible to add a Max% run category where the player has to collect all gems, all orbs, all skillpoints and complete Dragon shores collecting all tokens?

Hi, I've put my twitch channel name in my profile, but my stream isn't in stream page, but is only accessible by clicking on my profile. Now for example i'm doing a stream of Spyro 2.

Is there a procedure to follow to make appear stream in stream section?

Thank you

Hi,

Is it possible to add Gran Turismo 2 for emulators only in Gran Turismo series as a new game? In this way we can separate runs on real ps1 and emulator runs.

Thanks

Hi, How can i add subsplits, like this?

Level 1 (main split, total level time)

• part 1
• part 2
• part 3 Level 2 (main split) Level 3 (main split)

Thanks