Comentários
Skåne, SwedenO_Circles1 month ago

Nice :D super fun to see a runner from China. 8.693 is the correct number to submit for real time, but for in-game time you should submit 11 (the number in the brackets). I edited it for you :)

sharkjack curtiram isso
tópico: Duke Nukem 3D
Skåne, SwedenO_Circles1 year ago

Imo it should be fine and I think we've verified runs with saves before, we've never discussed it though. It's not IL really, it's just the only good way to have it on SRC (can't have sub-sub-categories).

Episode runs is best used as way for people to upload episode PBs from RTA to get a sense of the best possible human-viable time I think, especially now that there is some potential for maybe a reroute where you start on ep3 and go for Bank Roll+Flood Zone trip clip and might even open up for Farenheit card skip if you don't mind resetting a lot-- I think it'd work out with ammo just barely with some good hits on the boss . Would be nice having ep2 in the middle instead also because Dark Side clip.

Quills curtiram isso
Skåne, SwedenO_Circles1 year ago

Oh wow, had no clue there was a Dutch version. Neat :D

Skåne, SwedenO_Circles3 years ago

So I've been looking into recording demos for full game runs. Success was limited, but here's what I came up with in case anyone else will be messing with it in the future:

  • Using Crispy Doom or Chocolate Doom you can make extended demo recordings for Hexen/Heretic using the -demoextend parameter (lets demos span across several levels)

  • Recording demos will normally make aiming pretty iffy, which you can fix by either using -shortticfix (aim is smoothed while recording, like in Doom), or -longtics which will make it behave as normal but also increases your demo recording size. I find that -shortticfix feels just fine so for me I'd choose that one

  • There's a standard max size for a demo recording, which is 128kB. From my limited testing it seems that these demo recordings (using -shorttic) end up at about 12.7kB per minute, which would limit you to ~10m. There is a parameter you can use to increase the max limit (-maxdemo), so you might want to put that at like -maxdemo 256 or even 512 just to be safe.

All in all, the launch parameters would be something like:

crispy-hexen.exe -iwad "G:\DOS\GAMES\HEXEN\HEXEN.WAD" -shortticfix -demoextend -maxdemo 512 -record demoName

The problem with all of this is that you cannot do saves/loads while demo recording (nor restarting the run via main menu), or it will desync. So as it stands this all works, but you'd have to do the run single segment

Maybe some other port handles saves/loads? Who knows. These are my findings anyway, hope it helps

Skåne, SwedenO_Circles3 years ago

So currently the rules for timing are as follows:

  • Start the timer when you see the mission brief screen
  • Timer ends when Plastro UFO blows up and flies away

I want to propose some changes to the timing, where the rules would look like this

  • Timing starts on selecting a character
  • Timing ends on first completely black screen after killing UFO

The reason for this is that it's much easier to accurately split for these manually. While it is true that when doing retiming, it's easy to find the first frame of explosion upon killing UFO, but it's also harder / more vague as to what is the correct frame when dealing with a rule like "Start the timer when you see the mission brief screen" since it's a fade in. Does it mean the first non-dark frame after fade-out from character select? Does it mean the first non-faded frame?

Basically I think the timing start is too unnecessarily vague to be used in retiming, and both rules are too hard to split accurately to in runs (particularly the ending is hard to time without sacrificing focus on playing, and even then it's hard)

Pls consider timing change :)

tópico: Minesweeper
Skåne, SwedenO_Circles4 years ago

Actually watch to end, I have some real suggestions about the boards as a whole.

Skåne, SwedenO_Circles4 years ago

Posting here for archival reasons; run invalid because part of the run is missing.

Run done by MrBrax, uploaded 8 sep. 2014-- no diploma glitch.

http://www.twitch.tv/mrbrax

tópico: The Site
Skåne, SwedenO_Circles4 years ago

hey MODS I just put up an ugly banner so can we DELETE ALL BANNERS now pls

neuro, Fiery_SR e 21 outros curtiu isso
tópico: The Site
Skåne, SwedenO_Circles4 years ago

Edit theme > do this to make things look ok

https://i.gyazo.com/5ae23b64b9b59ea97b5f5bb96360e7e4.png

Imaproshaman, The-Mad-King e 7 outros curtiu isso
tópico: The Site
Skåne, SwedenO_Circles4 years ago

Is this an out of season april fools' joke?

  1. Themes gone?
  2. On night mode, why is the header still this psych ward dentist green?
  3. On night mode, why is the TEXT green?
  4. Why is the text green at all anywhere???
  5. Why green???????

I'm trying to revert under Edit Theme but nothing works pls send help

neuro, Rithek e 22 outros curtiu isso
Skåne, SwedenO_Circles5 years ago

[big]Currently retimed[/big]

To keep track of what has already been retimed in case a retime is needed in the future, a list will be kept here.

Jiisti_007 1m 34s 417ms Makkeneer 1m 34s 417ms Jisti_007 1m 38s 884ms O_Circles 1m 41s 384ms memeslayerX 2m 35s 666ms Parrexion 2m 56s 100ms

Skåne, SwedenO_Circles5 years ago

Because of characters being named differently in Swedish/Finnish they will be referred to by profession. The guy in the mist is just called spooky guy.

Garden - Viola - ? Kindergarten - Mia - ? Baker - Birgit - ? Priest - Sigge - ? Spooky - Svate Sven - ?

[big]Airplane (end of run)[/big]

  • Diving Suit
  • Diving Helmet

[big]Diving Helmet[/big]

  • Weed Thresher (from finishing dog quest)

[big]Dog quest[/big]

Get a random call which is available after having the following:

  • Diving Suit
  • Level 4

[big]Level 4[/big]

  • Built 12 boats total (changing a piece and putting in water counts)
  • Have map piece from Baker
  • Have water tank from Kindergarten
  • Have navigation thing from Kindergarten (requires pews, get from turning in 2x bibles. Do not visit Kindergarten with pews on your first visit, or you'll be softlocked out of getting the piece)

[big]Baker Map Piece[/big]

  • Get a random call which is available after visiting Garden

[big]Diving suit[/big]

  • Have map piece from Spooky Man

Big thanks to MrBrax for providing decompiled source code, without him we would never have figured out what the flags were!

Skåne, SwedenO_Circles5 years ago

#Rules

After looking into the game more carefully, these are the new timings for any%

 - Timing starts on first frame of seeing workshop

 - Timing ends on first frame of the dashboard loading screen when going into the sea cutscene

 - All glitches are allowed

#Retimes & Autosplitter

Since this is all about introducing milliseconds to the leaderboards, current runs will be retimed according to these new rules and future runs will be retimed if they're very close to another run. There has also been an autosplitter developed in accordance to these new rules and you're encouraged to use it.

The autosplitter has been tested on the Swedish and Finnish versions on two different systems and will be added to the Livesplit database shortly, but I can't guarantee that it will work for everyone. Using it together with Dxwnd is not a problem, but it definitely will not work with the German version as none of us have it so support has not been added at all.

If the splitter isn't working for you, please contact me and I'll work out a fix.

#Motivations

Starting timing on workshop instead of the intro cutscene is because at that point, the engine technically hasn't switched scenes from the main menu. Furthermore, the intro cutscene plays when loading any file regardless of it's a new game or not, and as such it is considered part of the main menu and not the game itself.

The end timing is a bit more complicated; we'd like to end timing on the first frame of seeing the sea cutscene, but as it turns out it is possible to skip seeing this screen altogether if you alt-tab during the dashboard loading screen. In order to accomodate people doing this by mistake we explored a few options that involved counting the dashboard frames, but it turned that not only is the amount of these frames displayed inconsistent on individual systems by 1-2 frames (at 60fps), it is also inconsistent across different systems. Since all of these options we could come up with depend on the dashboard loading screen anyway, we decided that this should be used for the end timing.

Skåne, SwedenO_Circles5 years ago

Hello, I'm O_Circles the friendly neighbourhood speed police! It's been brought to my attention that your leaderboard contains some highly toxic category names, which are the following:

  • Church%
  • Gold%
  • Tech%
  • Portal%

You may not be experiencing any symptoms right now, but categories which just add '%' at the end of a word for no reason are well known carriers of malaria, ebola and scurvy. I'm not sure how you came across these category names but dealing in them is highly illegal and dangerous; a formal investigation will be launched tomorrow morning and we expect your full cooperation.

For your own safety (and society/SRcom at large), I urge you to burn these category names as soon as possible and stay away until environmental remidation has been carried out by SRcom hazardous materials professionals.

Regards, COMM'r. O_Circles

Skåne, SwedenO_Circles6 years ago

#Experiment

  • Built car in the same way every time with same filename

 Filename: a  Follows route in my Any% Guide, leaving Junkyard on Screen 6

 Mounted parts in order:   - Red Wheels Front   - Black Engine Front   - Seat   - Black Wheels Back   - Small Engine Closest Back   - White Fuel Tank Closest Back   - Steering Wheel

Screen 1 is the default Junkyard screen you go to on a new game Screen 2 is one screen left from that, and screen 3 is one more left etc.

[big]Results Here[/big]

#Findings

  • Screen 1 seems to always have at least 1 part

  • Seems like Big Engine and Small Engine very often spawn on the same screen or one screen apart. Maybe I messed up the execution and changed some rng value by alt tabbing once too much or something?

  • Tried to execute as similarly as possible but even when RNG let me build the car without having to sort through parts + no extra clicks (i.e. very similar to control), the Junkyard was still significantly different. Indicates build order not being significant.

  • Needs more data. I wonder if I will ever be bored enough to do this again

Skåne, SwedenO_Circles6 years ago

[quote]

symbols message startup message timer message pulse

thing		darkJedi			nolink

sector	sect0				nolink

thing		searchNode0		nolink
thing		searchNode1		nolink
thing		searchNode2		nolink
thing		searchNode3		nolink
thing		searchNode4		nolink
thing		searchNode5		nolink
thing		searchNode6		nolink
thing		searchNode7		nolink
thing		searchNode8		nolink
thing		searchNode9		nolink
thing		searchNode10	nolink
thing		searchNode11	nolink
thing		searchNode12	nolink
thing		searchNode13	nolink
thing		searchNode14	nolink
thing		searchNode15	nolink

float		searchWait=5.0
float		searchSpeed=2.0

int		searchNodes=-1	local
vector	currNode			local

int		player			local
float		lastSeenTime	local
int		looking=0		local

int		i=0				local
int		debug=0			local

end

code

startup: player = jkGetLocalPlayer(); SetTimerEx(1.0, 1, 0, 0);

for (i=0; i<=15; i=i+1)
{
	if (searchNode0[i] >= 0)
		searchNodes = searchNodes + 1;
}	
	if (debug) print("Number of Search Nodes:");
	if (debug) printint(searchNodes);
return;

timer: if (GetSenderId() == 1) { if (HasLOS(darkJedi, player)) { SetPulse(0.0); lastSeenTime = GetLevelTime(); looking = 0; } else { if ((!looking) && ((GetLevelTime() - lastSeenTime) > searchWait)) { if (debug) print("Looking for Kyle..."); call StartSearch; looking = 1; } } SetTimerEx(1.0, 1, 0, 0); } return;

StartSearch: currNode = 0; if (GetThingSector(darkJedi) == sect0) { // Boc is in the main chamber currNode = 0; } else { for (i=1; i<=searchNodes; i=i+1) { if (VectorDist(GetThingPos(darkJedi), GetThingPos(searchNode0[i])) < VectorDist(GetThingPos(darkJedi), GetThingPos(searchNode0[currNode]))) { currNode = i; } } } call DJMove; return;

DJMove: if (debug) print("Heading to node:"); if (debug) printint(currNode); AISetMode(darkJedi, 0x200); // awake and active AISetLookPos(darkJedi, GetThingPos(searchNode0[currNode])); AISetMovePos(darkJedi, GetThingPos(searchNode0[currNode])); AISetMoveSpeed(darkJedi, searchSpeed); SetPulse(0.5); return;

pulse: if (debug) printflex(VectorDist(GetThingPos(darkJedi), GetThingPos(searchNode0[currNode])));

call DJMove;
if (VectorDist(GetThingPos(darkJedi), GetThingPos(searchNode0[currNode])) < 0.2)
{
	if (debug) print("Reached Node:");
	if (debug) printint(currNode);
	// Dark Jedi has reached a node
	SetPulse(0.0);
	if (currNode == searchNodes)
	{
		currNode = 0;
	}
	else
	{
		currNode = currNode + 1;
	}		
	call DJMove;
}
return;

end [/quote]

Skåne, SwedenO_Circles7 years ago

If anyone has any findings, post 'em here!

The reason I'm posting this thread is, while we have ColonelSanders explanation of how to replicate this glitch, it's also possible to have the glitch persist over the entire run and not just individual levels as he is talking about.

IFS persisting over several runs for LifeL1ke

ColonelSander's method of replicating this:

Save file with the glitch active: (the files weren't named so I just uploaded all of them. In game, the save is named 00_Inf_Speed)

https://dl.dropboxusercontent.com/u/13839030/o.zip

Looked into some related memory stuffs:

http://pastebin.com/QFvwSPcY

Skåne, SwedenO_Circles7 years ago

Updated 2017-06-29

Yun 2 Quick Kill

Spamming lightning is way faster than holding

MAW Quick Kill

Very consistent

Make sure you wait until MAW comes to a full stop on the 2nd phase before throwing, and also that you have visibility on all the boxes

MAW Quick Kill 2 (inconsistent but fast)

RTA viable cuz of quick retries when you save as he floats away, but sometimes it seems like you don't deal enough damage initially and killing him like this is impossible on that save. Wouldn't go for this method unless I had to make up time.

Jerec Quick Kill

  1. Lure Jerec sideways so that he has to round the corner sharply to get into the updraft
  2. Force jump up, pull sequencers after you're out of Jerecs line of sight so he can't pull them
  3. Place 7 sequencers right besides the hole (NOT on), quicksave
  4. Place 1-3 more

4.a (lol) If Jerec is early, load quicksave and try to fall out very quickly in different directions, you can kill him with 7 sequencers. If you have time to place another sequencer or two and quicksave again for quicker retries that might be good too. Don't try this too many times.

  1. Fall out, don't die
  2. If it hasn't exploded already (early jerec), quicksave and wait for Jerec to go up
  3. Wait for explosion. If he doesn't die, load quicksave and change position 7.a If he takes a long time to come up after your quicksave, you can wait a bit and quicksave again so you get faster retries
Sobre O_Circles
Ingressou
7 years ago
Online
10 days ago
Corridas
196
Jogos jogados
Duke Nukem 3D
Duke Nukem 3D
Última corrida 2 years ago
71
Corridas
Katana ZERO
Katana ZERO
Última corrida 4 years ago
29
Corridas
Star Wars Jedi Knight: Dark Forces II
Star Wars Jedi Knight: Dark Forces II
Última corrida 4 years ago
20
Corridas
Star Wars: Dark Forces
Star Wars: Dark Forces
Última corrida 5 years ago
15
Corridas
Star Wars Jedi Knight: Mysteries of the Sith
12
Corridas
Blood
Blood
Última corrida 6 years ago
7
Corridas
Hexen: Beyond Heretic
Hexen: Beyond Heretic
Última corrida 3 years ago
7
Corridas
Redneck Rampage
Redneck Rampage
Última corrida 6 years ago
5
Corridas
Jogos seguidos
Star Wars Jedi Knight: Mysteries of the Sith
274
visitas
Star Wars: Dark Forces
Star Wars: Dark Forces
Última visita 1 year ago
687
visitas
Dink Smallwood
Dink Smallwood
Última visita 1 year ago
93
visitas
Redneck Rampage
Redneck Rampage
Última visita 2 years ago
59
visitas
Bygg bilar med Mulle Meck
Bygg bilar med Mulle Meck
Última visita 1 year ago
576
visitas
RONIN
RONIN
Última visita 3 years ago
154
visitas
Croc 2
Croc 2
Última visita 1 year ago
12
visitas
Ion Fury
Ion Fury
Última visita 2 years ago
185
visitas
Jogos moderados
Duke Nukem 3D
Duke Nukem 3D
Última ação 1 month ago
67
ações
Duke Nukem 3D: 20th Anniversary World Tour
53
ações
Star Wars: Dark Forces
Star Wars: Dark Forces
Última ação 1 year ago
29
ações
Bygg bilar med Mulle Meck
Bygg bilar med Mulle Meck
Última ação 1 year ago
21
ações
Star Wars Jedi Knight: Dark Forces II
Star Wars Jedi Knight: Dark Forces II
Última ação 21 days ago
15
ações
RONIN
RONIN
Última ação 3 years ago
10
ações
Hexen: Beyond Heretic
Hexen: Beyond Heretic
Última ação 7 months ago
7
ações
Ion Fury
Ion Fury
Última ação 3 years ago
7
ações