About the RNG numbers

These are 4 sets of numbers (the "RNG") that are manipulated throughout the run:

Seed (65534 numbers): This number is based on the adventure log checksum and it is a 16 bit LFSR. 2 numbers produce a short sequence (seed lock) that don't happen normally but can be forced using specific adventure log data. The number x5FEA will be generated every time during seed lock.

Counter (256 numbers): Every time the RNG is called the counter is increased by one. This number combined with the low 8 bits of the seed is used to produce a random number. This can be manipulated by counting steps, healing, and counting NPC movements.

Discard (16 numbers): This is used to determine how many numbers are discarded before the game uses a number. This is what cause the same battle to have different outcomes (the 16 paths as it was called in previous speedruns). This is manipulated only through actions in battles and is not part of the adventure logs (it is part of sram so it is saved). In a few battles a less than optimum fight was used to set up the discard for future manipulations.

Field Frame Counter (8 numbers): This number determines what NPCs move in town and the phantom ship movement on the overworld (both consume numbers). This number is manipulated by being frame perfect anytime the sprites are being animated. Any bonk, hesitation, misstep, or menu mistake will cause the FFC to be off. Sections of the route that are frame perfect:

The opening split from control to party registering.
The tower of Najima from load to jumping off the side.
The entire beginning up to the acorns of life is essential to getting a 5 HP gain (route 2.1 only).
The metal babble grind from load to encounter for both babbles.
The orochi and boss troll split up until the first set of stairs in Samanao.
The merchant split from load to yellow orb (an error here only affects the 12 RNG steps).
The final split from load until the fairy flute. an error on this split will not be known until Alefgard.
After you leave the merchant in the new town a new checksum will be written and no more seed lock. This means the 12 steps needed to get the town to grow are subject to random encounters if any part of the route isn't perfect. The only way to control the RNG for those 12 steps is to be route perfect up to that point, especially item order!

Any% Glitchless 2.2 notes

https://docs.google.com/document/d/1Jp8YLKIv5N2xvdYuN8h1dTyxUB7xSCxhGssXOviql1g/

Bestiary Resistance Chart

https://docs.google.com/spreadsheets/d/1BcMUB0IBqfJnAKNEZ15CgaAT5g0oAuD41DYy6jbbR3E

Dragon Warrior III Dream Ruby glitch (aka numbness glitch, item glitch) by vaxherd

By forming a party consisting of only dead characters, you can confuse
the game into modifying your party's status in useful ways, such as
changing weak armor into strong weapons and getting access to endgame
towns through the Return spell.


Cause of the glitch
-------------------
Each time you take a step, the game checks the square each character
just stepped onto and applies damage if it's a swamp or barrier square.
The game is smart enough not to try and damage characters who are dead,
but it assumes there's always at least one living character in the party
-- which the game normally ensures by preventing you from removing your
last living character at Luisa's Place, but if that character is numb,
the game lets you leave that character behind anyway, giving you a party
of only dead characters.  You can also end up with a party of 1 dead
character (the hero) by going to the fortuneteller in Assaram with the
hero dead and all other living characters numb, typically accomplished
by using the Dream Ruby on the other characters (hence the name of the
glitch).

Once you do get an all-dead party, the damage check gets confused and
tries to check a whopping 256 characters for damage.  Depending on what
data happens to be in memory, some of those "characters" will take
"damage" by subtracting 2 from the memory location that would have the
current HP of that character.  If the right "character" triggers damage,
the memory location will be where the party's items are stored, causing
an item to change to the item 2 steps before it in the item list, or
where the Return destination list is stored, giving access to towns you
haven't yet visited.


Technical details
-----------------
When moving to a new tile, $D389 does a far call to $B16A in bank 14.
This routine has two purposes: auto-cure any numb characters (1/16
chance per character per step) and check each non-dead character for
field damage.  The routine first initializes variables for the damage
check by calling $B1BD, then performs the check itself at $B1EE.

The main purpose of $B1BD is to count the number of living characters in
the party.  This count is stored to $66, and a list of party indices of
the living characters is stored starting at $68.  Zero is stored in $67
to initialize the counter for $B1EE.

$B1EE performs the field damage check as follows:
   1) Load the current counter value ($67) into register Y.
   2) Load the index of the tile under party member Y from $93+Y.
   3) If the map type ($9A) is zero (the overworld) and the tile index
      is $07, apply swamp damage and go to step 6.  (This is effectively
      dead code since the tile type for overworld tile index $07 is $05,
      so swamp damage would be applied anyway.)
   4) Load the tile type for the tile index from $6DE0 (indexed by the
      low 5 bits of the tile byte; the high 3 bits are the layer number
      in towns and dungeons).
   5) If the tile type is $05, apply swamp damage; if the tile type is
      $06, apply barrier damage.
   6) Increment the counter.
   7) If the counter is not equal to the number of live party members
      ($66), repeat from step 1.
Note that the counter is not checked against the limit until the end of
the loop, and it is tested for equality, so if there are no living party
members, the loop will iterate 256 times before the counter overflows
from 255 to 0 and the stop condition becomes true.

Damage is applied by loading a byte from the array at $68 (indexed by
the current counter value) and calling the damage routine, which
subtracts the damage from the character's current HP (HP is stored as 4
16-bit values at $071C).

In order for the bug to occur, at least one tile type on the map must be
$05 (swamp) or $06 (barrier).  This is true, for example, in the second
floor of Luisa's Place (map $44, tile type index $01).  Using that map
as an example, any zero-page byte whose low 5 bits are 00001 will cause
2 to be subtracted from an even address in the range $071C...$081A (due
to NES memory mapping, $0800...$081A are mapped to zero-page addresses
$00...$1A).  For a byte at zero-page address A which triggers damage,
the party index will be loaded from zero-page address A minus $2B (the
difference between $93 and $68); if the value of the byte at that
address is B, 2 (swamp) or 15 (barrier) will be subtracted from the byte
at address $071C + ((B & 127) ¤ 2).

Potentially useful addresses to modify are:
   - $0746, $074C: High byte of experience for characters 1 and 3, which
     can be underflowed to level the character up to 99 in the next
     battle.  Requires a party index byte of $15 or $18, respectively,
     and requires the next character's experience to not be a multiple
     of 256.
   - $0752, $0758: 3rd byte of Return list for characters 1 and 3 (if
     zero, swamp damage will change it to $FE, allowing access to
     endgame towns -- note that the borrow clears the Aliahan bit for
     the next character).  Requires a party index byte of $1B or $1E,
     respectively.
   - $077C...$079A: Party inventory.  The 1st, 3rd, 5th, and 7th items
     in each character's inventory can be changed; underflowing will
     also change the following item (as long as that item is not ID 0,
     an unequipped Cypress Stick).  Requires a party index byte of
     $30...$3F.
   - $079C...$07BA: Party spells.  The 3rd page of battle spells can be
     underflowed if the field spell byte is nonzero (as is the case for
     a level-1 Pilgrim, for example).  Requires a party index byte of
     $41...$4F (odd values).
   - $07BE: High byte of party gold.  Gold will not be capped at 99999
     when buying items (though the number displayed in the gold window
     is capped at 99999).  On underflow, this marks the first slot in
     the stored character list (normally occupied by the hero) as empty;
     creating a new character at Luisa's Place 2F would then overwrite
     the hero's data in the save file.  Requires a party index byte of
     $51.
   - $07C2: Stored-character index (in the adventurer list) for the 2nd
     party member.  This could be underflowed to a large value, though I
     haven't investigated whether this would produce any useful effects.
     Underflowing would also decrement the index of the third party
     slot, which could potentially allow having two copies of the same
     character in the party.  Requires a party index byte of $53, and
     requires the hero to not be in the third party slot.
In all cases, the party index byte is shifted left to address the HP
value, so the high bit of the byte can be either 0 or 1.

Note that some bytes which seem like they might be useful to underflow
(maximum HP, for example) can't be underflowed because the next byte is
zero; the damage routine treats the two bytes as a 16-bit integer, and
will not attempt to reduce it below zero.

Also note that if you underflow the third spell page for a Pilgrim, Heal
will be removed from the field spell list.  If you also subtract 2 from
the first spell page, the character will (if at level 1 or 2) learn Heal
at the next level-up.

The following addresses can trigger damage on Luisa 2F:
    - The random number seed ($1C and $1D) will trigger damage if it has
      the proper value.
    - $2F will be $01 in towns, which triggers damage if $01 is a swamp
      tile (as on Luisa's Place 2F)
    - The lead character position ($30 and $31) can trigger damage; for
      example, on Luisa 2F, tile index $01 is a swamp tile, so X or Y
      coordinate 1 (the top or left edge of the map) will trigger
      damage.
    - $83 appears to be used as a temporary in message processing, and
      it can take on values which trigger damage.
    - The map number ($8B) and map type ($9A) could potentially trigger
      damage.  Maps with type $01 are: $00 (Aliahan), $06, $07, $0A
      (Portoga), $0D (undefined map), $12, $50 (Isis), $96 (Isis oasis).
    - $9D receives the low 2 bits of a random value every 64 frames on
      the overworld if no party members are standing on a town.  There
      are no swamp or barrier overworld tiles in the $00-$03 range, but
      since the value does not change while in a town, it could be set
      on the overworld and then used in a town to trigger damage.
    - $A4 is a counter which increments with each random number
      returned; it could be manipulated to trigger damage.
    - The music data pointers at $D6...$DD could trigger damage.
    - The sound timers at $E2...$E9 and envelope offsets at $F7, $F9,
      $FB, and $FD could trigger damage, though timing would be tight.

Additional values which can trigger damage on Luisa 2F:
    - Consistent: $34, $45, $71, $73, $8D, $99, $B5, $C8, $CF, $DD.
    - Inconsistent (conditions not yet known): $0A, $0E, $12, $75, $77,
      $79, $7B.

Additional values which can trigger damage on the overworld:
    - The byte at $01 is consistently $07, which triggers damage.
      The associated character index byte is at $D6, the low byte of the
      first music channel data pointer.
    - $6C is consistently $E7 (low byte of the end of the overworld
      entrance list at 6/$B387) at entry to $B1EE, which would trigger
      damage, but it's cleared by other code if any preceding byte (such
      as $01) triggers damage.

The bug is also present in the initial release of the Japanese version
of the game (Dragon Quest III), though it was reportedly fixed in a
later rerelease.  Since DQ3 limits names to four letters (kana) long,
all data at $077C and later in DW3 is shifted 16 bytes toward $0700; for
example, inventory data is located at $076C rather than $077C.


Stick Slime glitch
==================

The Stick Slime is a dummy item which can be obtained via the Dream Ruby
glitch by glitching an empty inventory slot.  The game has 125 different
items, but the format of the inventory data allows for 128 different
item types, so setting an inventory slot to one of those 3 unused types
causes the game to read parts of the program code as item data.

When you try to use an item, the game checks a table that tells it
whether the item can actually be used and what to do when you use it.
For the Stick Slime, the game reads part of the program code that makes
it think the item can be used, but the data that says what to do with it
points into the middle of nowhere, so the results are random: sometimes
you can get several item messages at once, sometimes the game will
crash or do other strange things, sometimes nothing will happen.


Technical details
-----------------
$AE12 in bank 0 is called when using an item on the field.  This routine
first looks up the item's data in the table at $922B; bit 7 of the value
indicates whether the item can be used at all.  If so, or if (as applies
here) the item number is at least $77, the routine then looks up a jump
pointer for the item effect subroutine, which is stored in a 3-byte-per-
entry table (the first byte appears to be a flag byte) at $B0C5, which
only has entries for field-usable items.  The Stick Slime is item $7D;
as $7D is the first invalid item number, the effect routine pointer is
read from the first 3 bytes after the end of the $B0C5 table, which gives
the pointer $2948.

$2948 is within the PPU register region, pointing to (a mirror of)
PPUCTRL.  The CPU attempts to read an opcode from this address and gets
open bus, which will be $29 (the high byte of the address read for the
indirect jump).  $29 is AND #imm, so the CPU reads an operand byte from
$2949 (PPUMASK); this is also write-only, so the CPU gets $29 from open
bus again.

The next instruction is found at $294A; this is PPUSTAT, which will
return $00 (BRK) at the time this particular code is executed.  Dragon
Warrior III implements BRK as a sort of far call instruction, with two
operand bytes which indirectly select the function to be called (via
table lookup).  The first byte will be at $294B (OAMADDR), which is
write-only so the CPU gets $29 from open bus (the high byte of the
indirect address used for the load).  The second byte, however, will be
at $294C, or OAMDATA; since this code will execute while the PPU is
rendering the screen, the byte loaded will be depend on the precise
timing of the read.  The BRK handler uses table lookup rather than
directly taking the address from the operand bytes, so this won't
necessarily lead to a crash, but the particular behavior is effectively
random.

Incidentally, the subroutine pointer for item $7E (Black Raven) is $D385
($85 $D3 = sta $D3), which is also used for item $7F (Sword Horned)
since that item's flag byte doesn't have bit 7 set and the table offset
consequently isn't incremented for that item.  This address happens to
lie right before the normal call to the field damage subroutine, which
is what got all this started in the first place.  Coincidence or
insanely clever inside joke?  You decide.

The names of the invalid items come from overrunning the name tables;
for example, "Stick" is the second line of the name of the first item
(Cypress Stick), and "Slime" is the first line of the name of the first
enemy (Slime).  The garbage character at the end of "Slime" is a code
used in enemy names to indicate how the name is pluralized.


Is arbitrary code execution possible?
-------------------------------------
I really, really want to say "yes", just because it would be so much
fun.  But unfortunately, it doesn't seem to be possible, at least not
reliably.

The most likely exploitable path would be to read a value of $xF from
OAMDATA with $4 <= x <= $E; this causes the BRK handler to select bank
$1x at $8000, treat $8000 as a table of addresses, and jump to the
address at the entry in that table selected by the first BRK operand
byte -- here $29, so the jump target is read from $8052.  Potentially
exploitable values for the second operand byte include (note that on
entry, A is the party index of the character who has the Stick Slime, X
is $16, and Y is $29 from open bus):
   - $5F => $691D; this is the second byte of the 10th character's spell
     list in the third save file.
   - $6F => $68A8; this is the fifth inventory slot of the 7th character
     in the third save file.
   - $AF => $0F00; this mirrors to $0700 and is the beginning of the
     active party data.
   - $BF => $C915; this jumps into the middle of another subroutine with
     PLA instructions following, so stack manipulation might be
     possible.
However, the possibilities for finding one of these bytes in OAM are
limited.  Sprites in DW3 are positioned with an offset (0,4) from
multiple-of-8 coordinates, so byte 0 of a sprite entry will always be
$x3 or $xB and byte 3 will always be $x0 or $x8.  Bits $1C of byte 2
are always zero, so that leaves finding a sprite that uses one of the
values above in its tile set and triggering the OAMDATA read at the
exact instant (one of 2 cycles) the PPU is copying that byte to the
secondary OAM during sprite evaluation.

If the Stick Slime could be used in battle, data past the end of the
battle effect routine list ($BE3A, 53 entries) gives some interesting
pointers, like $0558 (found at offset $72; this is the battle command
data list, so you could write e.g. $20 $65 $65 by using Clothes,
Medical Herb, Medical Herb with the first 3 characters, use the Stick
Slime with the 4th character, and jump into the second save file's
inventory data).  Unfortunately, the item flags for battle are located
right before the field flags, so the overflow items overlap with the
first three items in the field list, which are weapons and thus not
field-usable.  Even if they were, the corresponding effect byte past the
end of 4/$B270 is $00, which is handled properly by the code (it would
be treated like the Blaze spell).  This applies to the other invalid
items as well.

On the Japanese version (Dragon Quest III), the Stick Slime routine
pointer is $8100, in the middle of a separate routine, and the Black
Raven pointer is $6600, in the second save file's spell list.  The
latter is promising, but unfortunately, when the game tries to write any
of the glitched item names to the text window, it crashes due to
overflowing a temporary buffer for copying the name.  (DQ3 uses a
different method to store names, with a length byte following the name
of the item.  The name copy loop has a similar bug to the Dream Ruby
glitch in that a length of zero results in copying 256 bytes.  The
buffer is located at $0634, so copying 256 bytes will overwrite all the
state information stored at the end of the $06xx page, such as the
current $8000 bank index which is stored at $06D5.)

Dragon Warrior/Quest Community Compendium

This is a community resource for all the Dragon Quest games: [https://goo.gl/1VyfSA](https://goo.gl/1VyfSA "https://goo.gl/1VyfSA")

Encounter Manipulation tutorial by Everhate (old)

https://www.twitch.tv/everhate/v/41364098

NES cartridge setup for manipulations

Here are the steps to setup a Dragon Warrior III NES cart for speedrunning:
This setup only works for routes that use discard x0E (2.0, 2.1, and 2.2)
 
1. delete all saves and reset
2. create log 2 name: E? sex: female MS: 5
3. reset
4. create log 3 name: vb sex: male MS: 5
5. reset
6. create log 1 name: A sex: male MS: 8
7. reset
8. continue log 1 (seed lock is loaded by default)
9. buy 2 wings and walk to reeve, you should get no encounters
10. wing to aliahan and save with Luisa
11. reset
12. continue log 1  (seed lock is loaded by default)
13. Immediately wing to reeve and walk right
14. before the forest tile you'll get a battle attack and reset
15. repeat 12-14 one more time for 2 total.
16. change log 2 message speed to 1 and load log 1.
17. wing to reeve,walk right 4 steps, then north before touching forest pause 1 animation up 2 and pace back and forth
18. depending on your pause you'll get either 3x black ravens or 2x ravens  1x anteater, both are fine, attack and reset
19. change log 2 message speed to 5
20. load RNG from log 3
21. delete log 1
22. create log 1 name: H sex: female MS: 8
23. reset
 
The cart is now set. this was a 1 time setup and you should never have to do the above again.
once you create your characters and add them (making sure the stats are correct)  reset as you normally would but do not load any RNG and simply continue log 1.
walk to reeve and you should get an encounter. this means log 3 loads by default and it is essential this happens.
log 2 is the seed lock and if it ever loads by default you cannot do the metal babble grind because when you create the file the wrong checksum will be written. after the babbles load order isn't important but you should strive to maintain this structure because it makes future resets easy.
until the discard changes (the 8 metal slimes) you do not need to do any setup to start a new game. delete log 1 and start a new log 1, do not load any other slots or reset.
 
 
If you need to reset the discard for another run you can use the current log 1 data no matter where you were in the game.(make sure you have a wing or return).
1. load RNG from log 2 and continue log 1
2. immediately wing or return to reeve and walk right, battle, attack, reset (same as above)
3. repeat 1 more time.
4. change log 2 message speed to 1 and load log 1.
5. wing or return to reeve,walk right 4 steps, then north before touching forest pause 1 animation up 2 and pace back and forth
6. depending on your pause you'll get either 3x black ravens or 2x ravens  1x anteater, both are fine, attack and reset
7. change log 2 message speed to 5 and continue log 1
8. reset
¤if log 3 is the babble fight do the next 6 steps to get the 8 slime file.
- 9. delete log 3
- 10. reset
- 11. create log 3 name: vb sex: male MS: 5
- 12. reset
- 13. load RNG from file 3 and continue log 1
- 14. reset
 
the cart is set. you can delete log 1 and create the new file and begin run (resetting between is not necessary)

नाम	लेखक
About the RNG numbers	pjplustwo 7 years ago
Any% Glitchless 2.2 notes	pjplustwo 7 years ago
Bestiary Resistance Chart	pjplustwo 7 years ago
Dragon Warrior III Dream Ruby glitch (aka numbness glitch, item glitch) by vaxherd	pjplustwo 7 years ago
Dragon Warrior/Quest Community Compendium	EvilAsh25 5 years ago
Encounter Manipulation tutorial by Everhate (old)	Avatarofthestage 8 years ago
NES cartridge setup for manipulations	pjplustwo 7 years ago
Random numbers in Dragon Warrior III by vaxherd	pjplustwo 7 years ago
True any% route notes by vaxherd	pjplustwo 7 years ago