Any% Quick Guide
Guías
/
Any% Quick Guide
Actualizado 3 years ago por evilmask

How to do the warp glitch: link

The video above will be used as a reference point; use the timestamps to check with the video.

  • Start the game from a clean save file

  • (0:21) Go through the first room, do not enter the next room

  • (0:30) Warp, then go 1 room to the left - repeat 4 times. For the first warp you have to be anywhere above the ground to avoid softlocking!

  • (0:44) Go through the vertical room

  • (0:52) Optional: jump as soon as you are fully on the fan to save 1 second. It's precise, but you can attempt it with no risk. If you miss it, just continue. (The video doesn't get it)

  • (1:03) Warp in the next room. You have to be on the ground for this warp. When you go back to the game, you should briefly see a death animation and then get immediately thrown into the next room. If you just get stuck in the same room and can't do anything, just restart checkpoint and try again

  • (1:08) Get inflate-a-mate, go to the next room, run to the cutscene, skip the cutscene. Go back to the entrance, open the door and warp. You want to be anywhere above the ground for this warp, otherwise you get stuck in the ground and have to inflate out of it to avoid dying

  • (1:24) Go through the next 2 rooms normally

  • (1:35) You're now back to the very first room. Go all the way down then to the right, do NOT warp this time

  • (1:58) Wait until the clones run to the left. After they have stopped, line yourself up with the middle clone, use inflate and hold right. As you cross the third beam, return the gadget. Go up-right to the next room and warp - same as (1:03)

  • (2:15) Throw the inflate on the switch and get the outfit. Go down to the door that leads down and warp (pause as soon as you press the switch), then go to the room above

  • (2:28) Press the switch and go right. Warp in the next room

  • (2:38) There are two options for this room:

  1. Faster option: destroy the robot by throwing the inflate at it upwards and inflating when it's fully above the robot. Inflate jump up 1 floor and go right to the next room
  2. Easier option (only 1 second slower optimally, not shown in the video): warp as soon as you enter the room, then press the switch and go down 1 floor, then go right to the next room
  • (2:45) Warp, then go 1 room to the right - repeat twice, then warp once more

  • (2:56) Go left through the passage that just opened

  • (3:02) Get to the bottom-left side of the room, either by destroying the patroller or going around through the top. Put the inflate on the switch and go down to the next room

  • (3:13) Open the door, then warp using the top entrance. This one is a bit tricky - you have to be as far left as possible to warp to the correct position and avoid getting stuck in a wall; you also need to jump high enough to reach the room transition - the clone's head should go above the door frame, you need to pause before that happens. After warping, go down to the next room

  • (3:18) Go left 1 room, then warp - repeat 3 times. For the last warp you have to be on the ground to avoid softlocking!

  • (3:36) Get jack boy, hack the robot and drop it down to the beam, go to the next room

  • (3:48) Hack the patroller, fire at the switch, go down, skip the cutscene

  • (3:55) Go back up, hack the patroller again. If the patroller was facing up or right when you hacked it: TODO: write the steps for the patroller clip

  • If the patroller was facing down or left when you hacked it, or if you find the clip difficult, move the patroller out of bounds around the map as shown in this video:

  • Jump into Malcolm's room

  • GG!

Estadísticas del juego
Seguidores
8
Partidas
219
Jugadores
5
Últimas noticias
Discord server launch

For anyone interested in Stealth Inc. 2 speedrunning, or the game in general, or even other games in the series, we now have a Discord server!

Join:

3 years ago
Corridas recientes
Nivel: 6-X: Falling Down
Nivel: 6-8: End Maim
Nivel: 6-7: Invading Spaces
Últimos hilos
Publicado 5 years ago
0 respuestas