DxWnd Setup For Oddworld: Abe's Oddysee/Exoddus

Basic Tutorial for setting up DnWnd for Oddysee/Exoddus https://youtu.be/nWh4Z5QL5s4

DxWnd Link: https://sourceforge.net/projects/dxwnd/

How to setup my custom auto-splitter which is the same as the official one, but with the additional options to view number of killed/saved mudokons.

You can view the changes from the official auto-splitter to my version here:
[github.com/Legnax/Oddysee-Autosplitter/pull/1/files](https://github.com/Legnax/Oddysee-Autosplitter/pull/1/files "https://github.com/Legnax/Oddysee-Autosplitter/pull/1/files")

You can download said new version here:

[https://github.com/NirelGurtenstein/Legna-Oddysee-Autosplitter-Update/blob/master/Official%20Oddysee%20Autosplitter%201.1.asl](https://github.com/NirelGurtenstein/Legna-Oddysee-Autosplitter-Update/blob/master/Official%20Oddysee%20Autosplitter%201.1.asl "https://github.com/NirelGurtenstein/Legna-Oddysee-Autosplitter-Update/blob/master/Official%20Oddysee%20Autosplitter%201.1.asl")

In the video below you can see a guide on how to download and use the new auto-splitter and see it working in a run and being consistent with dying and restarting the game and loading a save.

https://www.youtube.com/watch?v=vvOgT4D0O_Q

Movement Basics

Written by @GeekyLucii and @MarkTheW0lf

The very first thing to get to grips with is how to get Abe moving. Our favorite blue mudokon will need to reach Acrobatics 100 to get him through the game safely. Let’s look at each ability in turn:


# Grid Pattern

In true classic gaming fashion, our hero exists inside a tiled universe, like a 1D chessboard, with each screen being 15 tiles wide. Each time Abe takes a step, he moves one tile.

https://i.imgur.com/tjhLm3r.png

# Walking

Tile Movement: 1+

Rolling is faster (we… never summoned the courage to ask Abe why), and we can stop the roll on any tile we wish.

https://i.imgur.com/VVCxnnF.gif


# Rolling

Tile Movement: 1+

Running is a fast as rolling, and may be the more natural way to move, but the animation is a two-tile cycle, meaning we cannot stop on any tile we wish - we must properly align our run with the tile we are hoping to stop at. Sometimes no adjustment is needed: the run cycle ends on the tile we need to stop at, but other times we must re-adjust Abe by tapping the roll button, which shifts Abe’s cycle by one tile. Because Abe’s run cycle is two tiles long, you never have to roll more than once. Rolling twice puts you back on the same cycle as you started on.

https://i.imgur.com/uqt66Xn.gif


# Hopping

Tile Movement: 3

https://i.imgur.com/bd5gqEz.gif

# Sliding 

Tile Movement: 4

While running, we can release the directional button but continue holding ‘run’ for a sliding stop.

https://i.imgur.com/F3FEQ26.gif

# Run To Walk

Tile Movement: 3

We can also come out of a run by taking a walking step, then stopping. To do this, release the run button while holding the directional button to walk, then afterward release the directional button.

https://i.imgur.com/EvT3bsv.gif

# Run-Roll-Walk

Tile Movement: 6+

https://i.imgur.com/6k8Hj2e.gif

# Run-Jump-Slide

Tile Movement: 7

Abe will need to jump into a slide a few times. To do this, press the jump button while running and then let go of all buttons. Abe will do his best to slide to a stop.

https://i.imgur.com/zUG8tTr.gif

# Run-Jump-Walk

Tile Movement: 6

For a more controlled stop after a jump, we let go of only the run button while Abe is catching air. When he lands, he will begin a walk, which is where we need to let go of the directional button to stop him from moving further.

https://i.imgur.com/GetCwgF.gif


# Roll-To-Walk

Tile Movement: 4+

Counting tiles for Abe to stop his run is sometimes too cumbersome, so we present to you the roll pop-up. Here, you can land on whatever tile you want. There are two ways to do this, both begin with rolling.

* If you are rolling by holding the roll button, you merely have to release this button and Abe will spring up into a walk. Before he completes his step, release the directional button to stop him right in front of that lever.
* If Abe is rolling and you are only holding a directional button, then you can get out of the roll by pressing the roll button. But be warned: Abe doesn’t always listen, so we recommend double-tapping the roll button to make sure he knows we mean business.

https://i.imgur.com/w54lVSu.gif

# Roll-To-Sneak

Tile Movement: 4+

Similar to the roll pop-up, but now we release all buttons (except the directional button) and hold sneak in order to quickly enter stealth mode.

https://i.imgur.com/u97Dhvc.gif


# None Rolling out of a jump

https://i.imgur.com/xUiKBRD.gif

# Rolling out of a jump

https://i.imgur.com/QFI6NFK.gif

New Player Setup Guide

Hello, welcome to Oddysee!

So, you're interested in speedrunning? Welcome to the right post!

Be warned this game is hard but you can do it! A few things need to be set up though before you can get started with your runs.

# **DxWnd**

You will need some program that allows you to run the game in windowed mode. [DxWnd](https://sourceforge.net/projects/dxwnd/) is the one that is used mainly within our community. A guide for that can be found here https://youtu.be/nWh4Z5QL5s4

**IMPORTANT:** Make sure the game you are trying to use with DxWnd is on your C:/ drive. Otherwise, IT WILL NOT WORK.

# **Controller**

You're probably going to need a controller with a program to emulate it. You can use [JoyToKey](https://joytokey.net/en/), OR [Xpadder](https://xpadder.com/) (This one costs some money)

@HimmDawg made a guide for JoyToKey which can be found here 
https://youtu.be/TOwHJkGG0ws

A lot of members in our community use Xpadder, a video guide, as well as a complete written guide, will be found below.

https://youtu.be/6WjnRlVU0gk

Written guide with the video in case you're stuck. 

Complete Xpadder Tutorial for Oddworld: Abe's Oddysee & Abe's Exoddus

In this guide, I will be going over all of the steps in order to get Xpadder working for the games.

In order for this to work, you're going to need to have a window program, something like [DxWnd](https://sourceforge.net/projects/dxwnd/). I will link a 

video for this here. https://www.youtube.com/watch?v=nWh4Z5QL5s4

Firstly, you're going to want to get [Xpadder](https://xpadder.com/)

Once you have it purchased and have the program open you're going to be greeted with a blank canvas 

https://i.imgur.com/qpc9N3j.png

Firstly click the little controller icon in the top left and click on new. https://i.imgur.com/x92dlz1.png

You're then going to want to click open and find a controller that suits you. Xpadder has a lot of layouts but you can also find more around the web. For this example, I will be using an Xbox layout but the process is exactly the same regardless of the controller you choose. 
https://i.imgur.com/KvwKgLF.png

Once you have this done you're going to go through each of the sections and enable all of the keys for your controller. It's important to note that you need to place the buttons manually over each part once they are activated. 


Sticks: Click enable then follow the on-screen instructions. 
https://i.imgur.com/xE7cEV8.png


DPad: Click enable then follow the on-screen instructions.  
https://i.imgur.com/RgyIiVT.png


Buttons: Every time you press a button, move the respected square overtop of it on Xpadder.
You can also press down on the sticks here to get those buttons as well.
Make sure you get the bumpers too. LB | RB [L1 | R1] 
https://i.imgur.com/ZxnSNJP.png

Triggers: These can be on the outskirts of the controller that way they can be accessed easier. 
https://i.imgur.com/NZpHnOQ.png


This image shows how the controller should look after each button has been mapped. 
https://i.imgur.com/xbhTbuE.png

After you have finished this. You will click OK

I would recommend saving the controller at this point. You can name it whatever you want. 
https://i.imgur.com/8cRm9zt.png



To add a key to these buttons, you will simply click on the empty box and assign a key. I am going to give you my personal bindings for the game. It's important to note that whatever keys you set you will need to change them in the game to match. 

Run: R
Jump: Space
Sneak: T
Action: W
Roll: X
Throw: Z
Movement: Arrow Keys
Pause: Escape

Please see below for the in-game controller configurations. 

When setting up these bindings in the game make sure you have the keyboard option selected and you configure it by hitting C
https://i.imgur.com/eMRkS4J.png

In-game settings to match the controller. 
https://i.imgur.com/pxeeSxi.png

Set 1: You only need to have the arrow keys bound to either the Dpad OR the stick depending on which one you want to use for movement. I usually have mine set up for both. 
https://i.imgur.com/VCQvrpW.png
Set 2: 
https://i.imgur.com/LmcPm2y.png
Set 3: 
https://i.imgur.com/VLDgp0y.png

Side Note: If you want to use sticks and they are drifting you can click on the wrench icon and go to settings.
https://i.imgur.com/Zd0gwe2.png You can then increase the dead zone so that it's not being affected as much. 
https://i.imgur.com/V771ntR.png


Once you have all of the keys bound you will click on the LB | L1 button
https://i.imgur.com/4Fgi79E.png
Go to advanced in the bottom right. 
https://i.imgur.com/3agOdb7.png


You will then go to Set Selector and change it to "Set 2 While Held" 
https://i.imgur.com/syXQkBO.png


After this, you will go to the LT | L2 button in the program, 
https://i.imgur.com/MmyKZp0.png



Go to advanced in the bottom right. Navigate to Set Selecter and change it to "Set 3 While held" 
https://i.imgur.com/aH499Nl.png


CLICK OK

The two buttons should now look like this and when you hold them they should change to the next respected sets. 
https://i.imgur.com/O3HpOo5.png

You should now SAVE the key layout in the top right. 
https://i.imgur.com/9WYk26N.png


And now you're done! Good luck in your runs. :)


@HimmDawg made a guide for JoyToKey which can be found here 
https://youtu.be/TOwHJkGG0ws


Once you have your controller set up make sure that you go into the game and edit the keys. Always select the **Keyboard** option instead of the gamepad. Also, make sure you  **rebind** **alt**, **shift**,  and **crtl** to different keys. They can lock up your controller while you're doing a run.
Certain keys (such as G) are unable to be bound in-game since it classifies them as 'illegal'. If you bind a key and it resets once you restart your game then try binding a different button.


# **Live Split**
You will also need a splitting tool of some sort. We recommend [live split](https://livesplit.org/). It’s the one that our community relies on in order for our auto splitter to function properly. 

Once you have live split installed you can get your splits from the [resources](https://www.speedrun.com/abe1/resources) section on the game page for the category that you're interested in running. A basic category explanation can be found [here](https://www.speedrun.com/abe1/thread/sv2r1/). We **HIGHLY** recommend doing Any% NMG first. It is the most friendly category for new runners. Make sure you read up on the rules for the category that you want to run. These can be found on the Full-game Leaderboard OR the Level Leaderboard. All you have to do is click “View rules” in the upper right corner. 

# **ASLVarViewer**

In order for your times to be calculated correctly, we require a plugin with live split called **ASLVarViewer** this gives us the proper time readout with livesplit since it’s always a couple of hundred milliseconds off. A complete written and video guide can be found below.

__**Installing ASLVarViewer**__

In this guide, I will be showing you how to install ASLVarViewer a component for livesplit. I will also be showing you how to set up the autosplitter for Oddworld: Abe's Oddysee, Oddworld: Abe's Exoddus, Oddworld Munch's Oddysee.

In this example, I will be using Exoddus, but the process is almost exactly the same for the other games.

__**Downloads**__
The first thing you're going to want to do is to download live split. 
https://livesplit.org
This is the basic splitting tool that will work with the auto splitter. Always make sure you're using the most up-to-date version.

After you download that you're going to want to download ASLVarViewer. This can be found on the resources page for each of the games.

Oddysee: https://www.speedrun.com/abe1/resources
Exoddus: https://www.speedrun.com/abe2/resources
Munch: https://www.speedrun.com/omo/resources

After you download that you're going to want to put the ASLVarViewer file inside of your livesplit components folder. You can access this by right-clicking on livesplit desktop icon > Open file location 
https://i.imgur.com/xGGqS5I.png 
OR, by going into the livesplit folder itself, components. 
https://i.imgur.com/25MdJFh.png

Once that is set up you're going to want to get the splits from the respected game you're going to want to run. These can also be found on the resources page for each of the games.

If you're looking for a place to start I would always recommend Individual levels for any of the games. These can be a great start for new runners allowing them to practice specific parts of the game and be able to get competitive times before diving into a full run.

For Oddysee and Exoddus Any% NMG (No Major Glitches) is a great category to start with. It is the easiest for new players to learn and improve on.

For Munch Any% Clipless can be more noob friendly, however, Any% 60FPS is by far more popular. If you're willing to learn intense clipping then Any% 60FPS would be a good start.

__**Autosplitter Activation**__

Once you have your splits downloaded the next step is to open up live split. You're then going to want to right-click on livesplit > Open Splits > from file 
https://i.imgur.com/Q8qoTUr.png 
You're then going to want to find the splits that you downloaded from speedrun.com. 

After you open them you'll be greeted with the default layout provided by livesplit. Before we proceed any further we're going to want to activate the autosplitter. So, you're going to want to right-click on livesplit again > Edit splits. https://i.imgur.com/HHnA5In.png

You then want to click on the activate button. 

https://i.imgur.com/bsASSCB.png 


Then, click on the Settings button, it should no longer be greyed out. 

https://i.imgur.com/29sV96x.png

A lot of options are going to be available to you, but only a few need to be looked into.

Firstly, refresh rate. If your computer can handle it I would always recommend having a 100/120 refresh rate. This will give you the most accurate times on your splits. Otherwise, the default is perfectly fine.
https://i.imgur.com/SMYSLJK.png

If you plan on doing Individual levels you want to make sure that it is checked and Autosplits is unchecked (If you hover over the options it will tell you this as well). 
https://i.imgur.com/81Ot2Cv.png 

For Munch users, you want to check IL mode then select the level, and uncheck any other categories. https://i.imgur.com/JuOf3eM.png

After you've selected your options make sure you hit OK https://i.imgur.com/l1me10J.png

Then, hit OK again on the Splits Editor screen. https://i.imgur.com/e8wwvdo.png


__**Getting ASLVarViewer On Livesplit**__

The next step is to open the game.

(**Oddysee and Exoddus users**) You're going to need to open your game through DxWnD. If you don't have this set up a tutorial for it can be found here. https://youtu.be/nWh4Z5QL5s4

Once the game is fully open you're going to want to go into edit layout on livesplit. https://i.imgur.com/QCft8Bs.png

You will then click on the + icon > Information > ASLVarViewer https://i.imgur.com/L17gqbd.png

Next, Layout Settings 
https://i.imgur.com/3szqywY.png

Navigate to the ASL Var Viewer tab

Once here you're going to click 2 options Display 2 Rows and then Variables under the Value section. https://i.imgur.com/BHlJ3fM.png

After you have done that you'll now hit the drop-down arrow. You'll be greeted with a list of things that you can select. It's important to only select the options that are in the allowed zone. For our purposes, you MUST have loadless time selected at the very least. However, I would encourage you to have real-time and loadless time (RTA/IGT) so that way your times can be as accurate as possible when submitting to speedrun.com https://i.imgur.com/CCBjNEq.png 

Make sure you then hit OK 
https://i.imgur.com/xgcgpns.png

You can customize your layout however you want, as long as you have the ASLVarViewer showing with the 2 times on display, that is what is important. Once you're done you're then going to want to hit OK. https://i.imgur.com/8GVHbq5.png

The last thing we are going to do is change the livesplit to game time. To do this you're going to right-click the livesplit > Compare against > Gametime 
https://i.imgur.com/18kiEoi.png


__**Conclusion**__

To make sure it's working you can start a new game (If you're doing an individual level load into the level. For Munch users they must load into the lever and do RESTART LEVEL)

If everything has been set up correctly, your timer should now be pausing for loading screens, cutscenes, and transitions. 

Thank you for reading. I hope this guide was able to assist you. If you have any questions or concerns you can join the official Oddworld Speedrunning discord located here. https://discord.gg/uyqMtsD


# **Recoding**

If you don't have any form of recording/streaming software then [OBS](https://obsproject.com/) and [Stream Labs OBS](https://streamlabs.com/) are recommended. They are both free open-source software that anyone can use. 

# **You’re Ready to Run!**

Congrats! You got through the guide! Now you should be completely ready to run and destroy all the world records!

If you have any concerns or are confused about anything you can go to the forums https://www.speedrun.com/abe1/thread/qz8hx and ask any questions OR the discord link below. 

Good luck to everyone. If you want to join our community, please click the discord link found here -> https://discord.gg/uyqMtsD

Oddysee Any% NMG Game Guide: Paramonia Completed!

Setting up ASLVarViewer (For IGT)  and the AutoSplitter

Installing ASLVarViewer

In this guide, I will be showing you how to install ASLVarViewer a component for livesplit. I will also be showing you how to set up the autosplitter for Oddworld: Abe's Oddysee, Oddworld: Abe's Exoddus, Oddworld Munch's Oddysee.

In this example, I will be using Exoddus, but the process is almost exactly the same for the other games.

# **Downloads**
The first thing you're going to want to do is to download live split. 
https://livesplit.org
 This is the basic splitting tool that will work with the auto splitter. Always make sure you're using the most up-to-date version.

After you download that you're going to want to download ASLVarViewer. This can be found on the resources page for each of the games.

Oddysee: https://www.speedrun.com/abe1/resources
Exoddus: https://www.speedrun.com/abe2/resources
Munch: https://www.speedrun.com/omo/resources

After you download that you're going to want to put the ASLVarViewer file inside of your livesplit components folder. You can access this by right-clicking on livesplit desktop icon > Open file location 
https://i.imgur.com/xGGqS5I.png 
OR, by going into the livesplit folder itself, components. 
https://i.imgur.com/25MdJFh.png

Once that is set up you're going to want to get the splits from the respected game you're going to want to run. These can also be found on the resources page for each of the games.

If you're looking for a place to start I would always recommend Individual levels for any of the games. These can be a great start for new runners allowing them to practice specific parts of the game and be able to get competitive times before diving into a full run.

For Oddysee and Exoddus Any% NMG (No Major Glitches) is a great category to start with. It is the easiest for new players to learn and improve on.

For Munch Any% Clipless can be more noob friendly, however, Any% 60FPS is by far more popular. If you're willing to learn intense clipping then Any% 60FPS would be a good start.

# **Autosplitter Activation**
Once you have your splits downloaded the next step is to open up live split. You're then going to want to right-click on livesplit > Open Splits > from file 
https://i.imgur.com/Q8qoTUr.png 
You're then going to want to find the splits that you downloaded from speedrun.com. 

After you open them you'll be greeted with the default layout provided by livesplit. Before we proceed any further we're going to want to activate the autosplitter. So, you're going to want to right-click on livesplit again > Edit splits. https://i.imgur.com/HHnA5In.png

You then want to click on the activate button. 

https://i.imgur.com/bsASSCB.png 


Then, click on the Settings button, it should no longer be greyed out. 

https://i.imgur.com/29sV96x.png

A lot of options are going to be available to you, but only a few need to be looked into.

Firstly, refresh rate. If your computer can handle it I would always recommend having a 100/120 refresh rate. This will give you the most accurate times on your splits. Otherwise, the default is perfectly fine.
https://i.imgur.com/SMYSLJK.png

If you plan on doing Individual levels you want to make sure that it is checked and Autosplits is unchecked (If you hover over the options it will tell you this as well). 
https://i.imgur.com/81Ot2Cv.png 

For Munch users, you want to check IL mode then select the level, and uncheck any other categories. https://i.imgur.com/JuOf3eM.png

After you've selected your options make sure you hit OK https://i.imgur.com/l1me10J.png

Then, hit OK again on the Splits Editor screen. https://i.imgur.com/e8wwvdo.png


# **Getting ASLVarViewer On Livesplit**
The next step is to open the game.

(**Oddysee and Exoddus users**) You're going to need to open your game through DxWnD. If you don't have this set up a tutorial for it can be found here. https://youtu.be/nWh4Z5QL5s4

Once the game is fully open you're going to want to go into edit layout on livesplit. https://i.imgur.com/QCft8Bs.png

You will then click on the + icon > Information > ASLVarViewer https://i.imgur.com/L17gqbd.png

Next, Layout Settings 
https://i.imgur.com/3szqywY.png

Navigate to the ASL Var Viewer tab

Once here you're going to click 2 options Display 2 Rows and then Variables under the Value section. https://i.imgur.com/BHlJ3fM.png

After you have done that you'll now hit the drop-down arrow. You'll be greeted with a list of things that you can select. It's important to only select the options that are in the allowed zone. For our purposes, you MUST have loadless time selected at the very least. However, I would encourage you to have real-time and loadless time (RTA/IGT) so that way your times can be as accurate as possible when submitting to speedrun.com https://i.imgur.com/CCBjNEq.png 

Make sure you then hit OK 
https://i.imgur.com/xgcgpns.png

You can customize your layout however you want, as long as you have the ASLVarViewer showing with the 2 times on display, that is what is important. Once you're done you're then going to want to hit OK. https://i.imgur.com/8GVHbq5.png

The last thing we are going to do is change the livesplit to game time. To do this you're going to right-click the livesplit > Compare against > Gametime 
https://i.imgur.com/18kiEoi.png


# **Conclusion**

To make sure it's working you can start a new game (If you're doing an individual level load into the level. For Munch users they must load into the lever and do RESTART LEVEL)

If everything has been set up correctly, your timer should now be pausing for loading screens, cutscenes, and transitions. 

Thank you for reading. I hope this guide was able to assist you. If you have any questions or concerns you can join the official Oddworld Speedrunning discord located here. https://discord.gg/uyqMtsD

Xpadder Setup for Oddworld: Abe's Oddysee/Exoddus

https://youtu.be/6WjnRlVU0gk

Written guide with the video incase you're stuck. 

Complete Xpadder Tutorial for Oddworld: Abe's Oddysee & Abe's Exoddus

In this guide I will be going over all of the steps in order to get Xpadder working for the games.

In order for this to work, you're going to need to have a window program, something like [DxWnd](https://sourceforge.net/projects/dxwnd/). I will link a 

video for this here. https://www.youtube.com/watch?v=nWh4Z5QL5s4

Firstly, you're going to want to get [Xpadder](https://xpadder.com/)

Once you have it purchased and have the program open you're going to be greeted with a blank canvas 

https://i.imgur.com/qpc9N3j.png

Firstly click the little controller icon in the top left and click on new. https://i.imgur.com/x92dlz1.png

You're then going to want to click open and find a contoller that suits you. Xpadder has a lot of layouts but you can also find more around the web. For this example I will be using an Xbox layout but the process is exactly the same regardless of the controller you choose. 
https://i.imgur.com/KvwKgLF.png

Once you have this done you're going to go through each of the sections and enable all of the keys for your controller. It's important to note that you need to place the buttons manually over each part once they are activated. 


Sticks: Click enable then follow the on screen instructions. 
https://i.imgur.com/xE7cEV8.png


DPad: Click enable then follow the on screen instructions.  
https://i.imgur.com/RgyIiVT.png


Buttons: Everytime you press a button, move the respected square overtop of it on Xpadder.
You can also press down on the sticks here to get those buttons as well.
Make sure you get the bumpers too. LB | RB [L1 | R1] 
https://i.imgur.com/ZxnSNJP.png

Triggers: These can be on the outskirts of the controller that way they can be accessed easier. 
https://i.imgur.com/NZpHnOQ.png


This image shows how the controller should look after each button has been mapped. 
https://i.imgur.com/xbhTbuE.png

After you have finished this. You will click OK

I would recommened saving the controller at this point. You can name it what ever you want. 
https://i.imgur.com/8cRm9zt.png



To add a key to these buttons, you will simply click on the empty box and assign a key. I am going to give you my personal bindings for the game. It's important to note that whatever keys you set you will need to change it in game to match. 

Run: R
Jump: Space
Sneak: T
Action: W
Roll: X
Throw: Z
Movement: Arrow Keys
Pause: Escape

Please see below for the in game controller configurations. 

When setting up these bindings in game make sure you have the keyboard option selected and you configure it by hitting C
https://i.imgur.com/eMRkS4J.png

In game settings to match the controller. 
https://i.imgur.com/pxeeSxi.png

Set 1: You only need to have the arrow keys bound to either the Dpad OR the stick depending on which one you want to use for movement. I usually have mine set up for both. 
https://i.imgur.com/VCQvrpW.png
Set 2: 
https://i.imgur.com/LmcPm2y.png
Set 3: 
https://i.imgur.com/VLDgp0y.png

Side Note: If you want to use sticks and they are drifting you can click on the wrench icon and go to settings.
https://i.imgur.com/Zd0gwe2.png You can then increase the deadzone so that it's not being effected as much. 
https://i.imgur.com/V771ntR.png


Once you have all of the keys bound you will click on the LB | L1 button
https://i.imgur.com/4Fgi79E.png
Go to advanced in the bottom right. 
https://i.imgur.com/3agOdb7.png


You will then go to Set Selector and change it to "Set 2 While Held" 
https://i.imgur.com/syXQkBO.png


After this you will go to the LT | L2 button in the program, 
https://i.imgur.com/MmyKZp0.png



Go to advanced in the bottom right. Navigate to Set Selecter and change it to "Set 3 While held" 
https://i.imgur.com/aH499Nl.png


CLICK OK

The two buttons should now look like this and when you hold them they should change to the next respected sets. 
https://i.imgur.com/O3HpOo5.png

You should now SAVE the key layout in the top right. 
https://i.imgur.com/9WYk26N.png


And now you're done! Good luck in your runs. :)

MarkTheW0lf

Oddworld: Abe's Oddysee

Zulag 3

Veictas

l1ndblum

laurensoddysee1

Console

System

# **UPDATE: 15/10/2023**

Grammar has been updated on several rules for better understanding.
Formatting has also been updated for better readability.
Some of the changes are duplicated from the Exoddus' rules update from 23/08/2023.


## **General game rules:**

- _(Removed)_ ~~The sole exception t

15-10-2023: Console, rule clean-up and Max.Cas new kill count

New Categories, Restarting Mandatory AND Anywhere?!?! 8/2/23

Max Cas. Changes, D.D.G. Returns, IL changes and more 2/2/23

Oddworld

New player starting guide

Community Discord

Rule Additions/Updates

Active Oddworld Streamers

Archived Max Cas Runs

autoturn

UltraStars3000

LegnaX

Bluecandel

serpata

LuigiLeone

الاسم	المؤلف
DxWnd Setup For Oddworld: Abe's Oddysee/Exoddus	MarkTheW0lf 3 years ago
How to setup my custom auto-splitter which is the same as the official one, but with the additional options to view number of killed/saved mudokons.	تم الحذف 4 months ago
Movement Basics	MarkTheW0lf 1 year ago
New Player Setup Guide	MarkTheW0lf 1 year ago
Oddysee Any% NMG Game Guide: Paramonia Completed!	MarkTheW0lf 1 year ago
Setting up ASLVarViewer (For IGT) and the AutoSplitter	MarkTheW0lf 3 years ago
Xpadder Setup for Oddworld: Abe's Oddysee/Exoddus	MarkTheW0lf 3 years ago